Standard low level WC with 520 lever cistern
Finishes: C1 & P2 White; T31 Chrome plated
Product Type: Traditional
Material: C1 & P2 Vitreous china; T31 Bodies are of all brass construction
Overall height: max 114cm, min 96cm
Size: 510 x 740 x 1140 mm
Weight: 33.94 kg
Barcodes: T31 CHR (5055806007048),P2 (5055806005198),C1 (5055806001992)
Additional Information
Low Level wc can be used where the soil pipe is located in the floor. The pan can be located over the soil pipe by cutting the horizontal flush pipe to length.
The cistern height can be varied by cutting the vertical flush pipe to length – maximum height is 1,075mm to the top of the cistern, minimum height is 900mm.
Water Inlet valve hole is located on the base of cistern tank on the right hand side
Bottom inlet valve (SP5A). Back inlet valve available as optional item (SP511).
SP511 : Back entry kit for C1/C3/C24, including back entry inlet valve with flexible hose and plug
Dual flush cistern fittings with ceramic lever on the right.
Press lever down for 6 litre flush and up for 3 litre flush.
P trap standard height pan – height from floor to pan rim is 40cm.
Regal Height pan ( floor to pan rim height 48cm ) available : P16
Ceramic soil connection pipes. The S trap connector bending down to the floor : C26
Cistern can be used with optional decorative Ornate Brackets T32 CHR
Low level wc must be used with standard Burlington toilet seats
Supplied with floor fixings.
Recommended to be used with cistern tank isolation valve W25
Compliance / Approvals
BS EN 997:2012
WC pans and WC suites with integral trap
Chrome plated to BS EN248:2002
Sanitary tapware. General specification for electro deposited coatings of Ni-Cr